Lift Modernisations

Equality Act Compliant Lift Upgrade – DDA

This lift upgrade package is designed to meet the requirements of EN81-70. Accessibility to lifts for persons with physical, sensory or cognitive disability.

Typical DDA lift upgrade package comprises of:

• COP (car operation panel) lift buttons upgrade located as per EN81-70
• Emergency Lighting
• LOP Landing Operational Panels) Located as per EN 81-70
• Mirror installed to the rear wall
• Handrail
• Braille where required
• Induction loop
• Door entrance increased where applicable

Please note: full compliancy can only be achieved if the existing lift cabin size is at least 1100 x 1400mm with the landing doors entrance 800mm wide.

We may be able to increase door entrances, and lift car sizes subject to a survey.

Cosmetic Lift Upgrades

This lift upgrade package is purely to revitalise a tired looking lift to simply update the décor. This can include features with in the lift car.

Options for:

• Lift car walls
• Lift car ceiling
• Lift car floors
• Lift car buttons and COPs
• Lift doors
• Lift lighting
• Lift hand rails and mirrors

These can be in line with the building’s décor, or in line with your company branding. With an extensive range of products for you to select from ranging from luxury to standard finishes. Complete overhauls of the lift car to simply making a lift floor slip resistant. Check out our inspiration library for ideas.

Upgrades Lift Auto Diallers

Lift Emergency Communications

This is something all passenger lift owners should be looking into, if they haven’t already due to the fast approaching digital switch . You can learn more about this and what you need to do here.

Lift Component Upgrades

This package is when a lift is no longer performing as it should for any number of reasons and any combination of the below can be replaced to modern day equipment lift modernisation.

• Lift Controller
• Lift Shaft Wiring
• Motor & Drive
• Lift Ropes
• Lift Doors
• Complete new cabin to fit pre-existing lift shaft

Green Passenger Lift Upgrades

Our team would like to see all lifts using sustainable and efficient equipment and components. With one of these components fitted to your passenger lift, your lift could become 70% self-charging allowing huge energy cost savings, literally paying for itself and at the same time significantly lower a buildings carbon footprint.

This lift package is compatible with all of our MRL passenger lifts, to find out if it is compatible with your passenger lift contact us today.

Firefighter Lift Modernisation

This package is for when an existing lift can be upgraded to become an firefighter lift. Dependent on a number of factors. For more information please contact us and send a lift drawing and building plan if possible.

As an example a firefighting lift must

• be in its own dedicated lift shaft
• have a means of water egress from the lift shaft pit.

Learn More Here

Evacuation Lift Modernisation

This package is for when an existing lift can be upgraded to become an evacuation lift. Dependent on a number of factors. For more information please contact us and send a lift drawing and building plan if possible

As an example an Evacuation lift to comply with regulations must have

• Lift car minimum size of 1100mm x 1400mm
• minimum lift entrance doors 800mm

Learn More Here